Editing A File Name; Viewing The File Information - Fostex UR-2 Owner's Manual

Editing a file name

You can edit the file name of a file.
In the following procedure, it is assumed that the
STORAGE UTILITY menu screen is shown.
You can only edit the fie name of the
<Note>:
current file. Before entering the MENU mode,
select a desired file of which you want to edit
the file name.
(1) While "Edit file name" is highlighted, press the
[ENTER] key.
The display changes to show the screen for
editing the file name of the current file.
(2) Edit the file name.
Use the [ ] and [
editing (flashing) point and use the [MENU]
dial to enter the desired alphanumeric
character.
You can also edit the file name using a USB
keyboard.
(3) After finishing editing, press the [ENTER] key
to confirm.
The display returns to the Home screen.
<Memo>: The edited file name is separated
to "fSCENE" and "fTAKE" and stored to the
"Description" field in the BEXT chunk.
<SCENE> and <TAKE> in the iXML Chunk
are also updated.
Model UR-2 <MENU mode / STORAGE UTILITY menu>
Flashing
] keys to select the
-83-

Viewing the file information

You can view the file information of the current
file.
In the following procedure, it is assumed that the
STORAGE UTILITY menu screen is shown.
You can only view the file informa-
<Note>:
tion of the current file. Before entering the
MENU mode, select a desired file of which you
want to view the information.
(1) Use the [MENU] dial to highlight "File Info.",
press the [ENTER] key.
The display shows the file information
including the FS/bit, recording date and time,
duration and volume.
(2) To dismiss the file information screen, press
the [STOP] key to exit the MENU mode.