CD-R/RW MASTER RECORDER CR500 (MENU mode: DISK UTILITY menu)
The "Edit File Name" menu item edits the file name of a WAV file on an unfinalized BWF
disc. This menu item is not available with CD-DA discs and finalized BWF discs.
<Note>: After editing a file name, do not forget to rewrite the file system using the
"Rewrite File Sys" menu item described on the previous page. However, each time you
rewrite the system file, the number of remaining recordable files decreases by one and
the remaining disc space decreases. Therefore, we recommend rewriting the system file
after you complete all file editing operations.
If you attempt to eject an edited disc without rewriting the file system, the popup
screen for rewriting the file system appears (see the previous page).
1)
While the recorder is stopped, press the
[ENTER/YES] key.
The unit enters the MENU mode and the
MENU list screen as below is shown.
2)
Use the [MENU] dial to highlight
"DISK UTILITY " and press the
[ENTER/YES] key.
The display now shows the DISK UTILITY
menu screen.
3)
Use the [MENU] dial to highlight "Edit File
Name " and press the [ENTER/YES] key.
The display now shows the screen for
selecting an audio file from the audio file
list.
Editing a file name [Edit file name]
89
4)
Use the [MENU] dial to select an audio file
you want to edit and press the [ENTER/YES]
key.
The display now shows the "EDIT FILE NAME"
screen. On this screen, you can edit the
current file name (the rightmost character
of the name flashes).
5)
Edit the file name.
Use the [SKIP/CURSOR
the cursor point (flashing point).
Use the numeric ([MEMORY]) keys or [MENU]
dial to select the desired character of the
flashing point.
Pressing the [CLEAR/+10] key deletes the
immediate right character of the flashing
point.
Therefore, by pressing the [CLEAR/+10] key
repeatedly when the leftmost character
flashes, you can delete the whole current
name.
Do not edit or delete ".wav",
<Note>:
the file extension of a file name. If you
attempt to save a file name which does
not have this file extension, the dis-
play shows "Void" and returns to the
previous screen.
5)
After entering the desired name, press the
[ENTER/YES] key.
The old name is replaced with the new name.
6)
To exit the MENU mode, press the [STOP/
HOME] key.
The display returns the Home screen which
has been shown before entering the MENU
mode.
] keys to move