Turning On The Power; Setting The Internal Clock - Fostex UR-2 Owner's Manual

Turning on the power

By pressing the [POWER] switch, you can power
on the unit.
If the unit starts up without any storage devices
inserted, the display shows the following Home
screen.
For details about the display shown when start-
ing up the unit with a storage device inserted,
see "Setting a storage device" on page 26.
Turning off the power
To turn off the power, simply press the [POWER]
switch.
However, during playback or recording, the
[POWER] switch is disabled and you cannot turn
off the power by pressing the [POWER] switch.

Setting the internal clock

The UR-2 has the internal clock, which is adjusted
according to the local time when shipped. There-
fore, set the time to your local time before using
the unit.
The internal clock time is used for the default
file name of a file which is created when record-
ing, the file creation date/time, the time stamp
of a BWF file, and the start time of the timer play
function. Therefore, it is recommended to set the
internal clock correctly.
<Note>: To add the time data to a file name, set
the "Default File name" item in the SYSTEM
SETUP menu of the MENU mode appropriately
(see page 73).
1) Press the [ENTER] key to enter the MENU mode.
2) While "SYSTEM SETUP" is highlighted, press
the [ENTER] key.
The display now shows the menu items of
the SYSTEM SETUP menu.
3) Use the [MENU] dial to highlight "Adjust RTC."
and press the [ENTER] key.
The display now shows the current date/
time of the internal clock.
-23-
Model UR-2 <Preparation>
Flashing