Names And Functions; Front Panel - Fostex UR-2 Owner's Manual

Names and functions

When the slot protection panel
is fitted
POWER
PHONES
(KYBD ONLY)
MIN MAX
2
1
POWER
PHONES
(KYBD ONLY)
MIN MAX
About Non-shift mode and Shift mode
*Some keys have the secondary function which
is available when the SHIFT indicator is lit (i.e.
in the Shift mode), while the primary function
is available when the SHIFT indicator is unlit
(i.e. in the Non-shift mode).
The secondary function is called "Shift function"
and printed under a key on the white back-
ground. When you turn on the power, the unit
boots up in the Non-shift mode.
In this manual, we sometimes say "when
SHIFTed" and "when unSHIFTed", instead of
"when the SHIFT indicator is lit" (or "in the Shift
mode") and "when the SHIFT indicator is unlit"
(or "in the Non-shift mode") respectively.
1) [POWER] switch
Turns on or off the power of the unit.
2) [PHONES] jack, [PHONES] control
You can connect a stereo headphones plug to
the [PHONES] jack and control the headphones
volume using the [PHONES] control.
3) [USB (KYBD ONLY)] port
This port is used for connecting a USB keyboard.
When you use a USB keyboard, set the keyboard
type (US or JAPAN) appropriately using the
"Keyboard type" menu item in the "SYSTEM
SETUP" menu of the MENU mode (see page 78
for details).
24 23
AUTO PLAY
USB PC USB HOST
EJECT
READY
SD-1 SD-2
SD-1 SD-2
3 4 5 6
29
4 6
AUTO PLAY
USB PC USB HOST
EJECT
READY
SD-1 SD-2
28 27 26
Model UR-2 <Names and functions>

Front panel

22 21 20
19
PLAY
SHIFT MODE TIME REC RDY
EDIT REPEAT
REC
FILE SEL DISPLAY
UR-2
STRG SEL STEREO RACK MEMORY RECORDER
7 8
PLAY
SHIFT MODE TIME REC RDY
EDIT REPEAT
REC
FILE SEL DISPLAY
UR-2
STEREO RACK MEMORY RECORDER
STRG SEL
25
4) [SD-1] indicator
Indicates the condition of the SD card inserted
on the [SD-1] slot. You can see the indicator
regardless of whether or not the slot protection
panel is fitted.
• Lit in orange: The unit is reading data.
• Lit in red: The unit is writing data.
• Lit in green: The unit is not accessing the SD
card.
• Unlit: No SD card is inserted or the unit is in
sleep mode.
5) Fixing screw for the slot protection panel
The protection panel protects the card slots and
USB port for the storage devices.
To access the slot/port, loosen the fixing screw
and open
for details).
6) [SD-2] indicator
Indicates the condition of the SD card inserted
on the [SD-2] slot.
You can see the indicator regardless of whether
or not the slot protection panel is fitted.
See [SD-1] indicator above for the indicator
status.
7) [FILE SEL] / [STRG SEL] key
This key has primary (unSHIFTed) and second-
ary (SHIFTed) functions.
When unSHIFTed:
Pressing this key enters the file select mode
(see page 42).
-13-
18 17 16 15 14
13
MENU / ENTER
EXIT FILE/CURSOR CUE/LOCATE MIC IN
MRGN RST PREV CUE NEXT TIME EDIT MIC SET
STOP PLAY REW F FWD
MIN MAX MIN MAX
ABS 0 INPUT LEVEL MIC GAIN
REC END
9 10 11
When the slot protection panel is not fitted
MENU / ENTER
EXIT FILE/CURSOR CUE/LOCATE MIC IN
MRGN RST PREV CUE NEXT TIME EDIT MIC SET
STOP PLAY REW F FWD
MIN MAX MIN MAX
INPUT LEVEL MIC GAIN
ABS 0
REC END
the slot protection panel (see page 26
PHANTOM
MIC IN
12
PHANTOM
MIC IN