Deleting A File - Fostex UR-2 Owner's Manual

If you attempt to select a copy des-
<Note>:
tination which does not have enough space
to accept the copy source files, the popup
window as below appears and you cannot
select the destination.
(5) Use the [MENU] dial to highlight "[EXECUTE]"
and press the [ENTER] key.
The unit starts file copy from the SD card on
the SD1 slot to the USB memory.
After finishing file copy, the popup window
as below appears and stop accessing.
(6) Press any key to exit the MENU mode.
Model UR-2 <MENU mode / STORAGE UTILITY menu>
You can delete a file on the current storage de-
vice.
In the following procedure, it is assumed that the
display shows the STORAGE UTILITY menu.
<Note>:
space does not increase unless you turn off
and on the power or remove and set the stor-
age device.
(1) Use the [MENU] dial to highlight "Delete file"
and press the [ENTER] key.
The display shows the file list of the current
storage device.
(2) Use the [MENU] dial to highlight a file you want
to delete and press the [ENTER] key.
The display shows the popup window as
below.
(3) Press the [ENTER] key while holding down the
[REC] key.
The selected file is deleted and the display
returns to show the file list.
The files below the deleted file in the list
moves up.
(4) Press the [STOP] key to exit the MENU mode.
-85-

Deleting a file

When you delete a file, the remaining
Flashing