Canon WebView Livescope User Manual page 16

5-3-2. Changing Screen Size
You can change the image size (Screen Size) displayed on the viewer.
Follow the procedure below to change the Screen Size settings.
1
In the View menu, tap Image Size Settings.
2
In the Image Size Settings dialog box, select the desired Screen Size and tap the OK button.
When Screen Size is set to 320 x 240 (Virtual) and Received Image Size is set to 320 x
Tip
240, the viewer displays the image as it is. If Received Image Size is set to other than 320
x 240, the size of received image is modified to 320 x 240 and the viewer displays 240 x
180 part of the modified image that is cut out from the center.
To change Received Image Size, change the setting in the camera server. For details, refer
to the descriptions of Video Capture Size in Chapter 3, "Camera and Video Settings Page"
(if the VB-C10/VB-C10R is being used, it is in "Camera Settings Page") section of the
user's manual provided with the camera server.
5-3-3. Displaying Help/Status
To switch between displaying help message and status of the camera, select and deselect
Status Display in the View menu.
To display Help (When Status Display is not selected)
To display Status
Displays various help messages.
Displays Frame Rate (fps) and Received Image Size.
12