Canon WebView Livescope User Manual page 12

5-2-2. Adjusting Pan/Tilt Angle of the Camera
First obtain camera control privileges and then tap the point that you want to focus the
camera on the image window ( P. 5, 6). The camera pans and tilts to make that point the
center of the image.
5-2-3. Changing Zoom Ratio of the Camera
First obtain camera control privileges and then perform the following operations.
Normal Mode
Zoom slider ( P. 5)
Zoom ratio can be changed by dragging the sliding lever with the stylus. Drag it to the
right to zoom in (telephoto) and drag it to the left to zoom out (wide-angle).
Navigation button ( P. ii)
Press the right or upper part to zoom in (telephoto) and press the left or lower part to
zoom out (wide-angle).
Full Screen Mode
Navigation button ( P. ii)
Press the right or upper part to zoom in (telephoto) and press the left or lower part to
zoom out (wide-angle).
5-2-4. Turning Backlight Compensation ON and OFF
First obtain camera control privileges and then perform the following operations.
Normal Mode
Tap the Backlight Compensation button ( P. 5) to switch between ON and OFF.
When the image becomes dark due to backlight, turn this feature ON.
Full Screen Mode
Tap Backlight Compensation on the Camera Control/View Settings menu ( P. 6) to
switch between ON and OFF.
When the image becomes dark due to backlight, turn this feature ON.
5-2-5. Pausing and Restarting the Image
Tap the Pause/Restart button ( P. 5) to pause the image that is currently viewed.
Tap the Pause/Restart button again to restart the image that is currently paused.
8