Remove The Server Blade; Remove The Access Panel - HP BL465c - ProLiant - 2 GB RAM User Manual

Remove the server blade

To remove the component:
Identify the proper server blade.
1.
Power down the server blade (on page 12).
2.
Remove the server blade.
3.
Place the server blade on a flat, level work surface.
4.
WARNING:
internal system components to cool before touching them.
CAUTION:
before beginning any installation procedure. Improper grounding can cause ESD.

Remove the access panel

To remove the component:
Power down the server blade (on page 12).
1.
Remove the server blade (on page 13).
2.
Lift the access panel latch and slide the access panel to the rear.
3.
Remove the access panel.
4.
WARNING:
internal system components to cool before touching them.
CAUTION:
before beginning any installation procedure. Improper grounding can cause ESD.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, properly ground the server blade
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, properly ground the server blade
Operations 13