Remove the mezzanine connector cover.
4.
Install the mezzanine card. Press down on the connector to seat the board.
5.
Install the access panel (on page 14).
6.
Install the server blade
7.
HP Smart Array E200i Battery-Backed Write Cache
module option
To install the component:
Power down the server blade (on page 12).
1.
Remove the server blade (on page 13).
2.
Remove the access panel (on page 13).
3.
Remove the hard drives.
4.
("Installing a server
blade" on page 16).
Hardware options installation 29