Connecting The Power Cord And Telephone Line - Brother MFC-685CW Quick Setup Manual

8
While holding the paper tray in place, pull out
the paper support
unfold the paper support flap
Note
Do not use the paper support flap
paper.
Note
You can use the photo bypass tray which is
located on the top of the paper tray to print on
× ×
photo 4 6 in. (10 15 cm) and photo L size
paper.
For details, see Loading photo paper in Chapter 2
of the User's Guide.
until it clicks, and then
.
for Legal size
Setting Up the Machine
4 Connecting the power cord
and telephone line
1
Connect the power cord.
2
Connect the telephone line cord. Connect one
end of the telephone line cord to the jack on the
machine marked LINE and the other end to a
modular wall jack.
Improper Setup
DO NOT connect the interface cable.
Connecting the interface cable is done during
the software installation process.
7