Install The Power Cord And Phone Line - Brother MFC-9440CN Quick Setup Manual

4 Install the power cord and
phone line
1
Make sure that the machine's power switch is
off. Remove the label covering the AC power
inlet.
2
Connect the AC power cord to the machine.
3
Plug the AC power cord into an AC outlet. Turn
the power switch on.
4
Connect one end of the telephone line cord to
the socket on the machine marked LINE and
the other end to a modular wall socket.
Setting Up the Machine
Warning
• The machine must be fitted with an earthed plug.
• Since the machine is grounded through the power
outlet, you can protect yourself from potentially
hazardous electrical conditions on the telephone
network by keeping the power cord connected to
your machine when you connect it to a telephone
line. Similarly, you can protect yourself when you
want to move your machine by disconnecting the
telephone line first and then the power cord.
Note
If you are sharing one phone line with an external
telephone, connect it as shown below.
Note
If you are sharing one phone line with an external
telephone answering device, connect it as shown
below.
Please set the receive mode to
External TAD.
For more details, see "Connecting an
external TAD" in Chapter 7 of the User's
Guide.
7