Connecting The Power Cord And Telephone Line - Brother MFC-235C Quick Setup Manual

STEP 1
Setting Up the Machine
8
While holding the paper tray in place, pull out
the paper support
unfold the paper support flap
Note
Do not use the paper support flap
paper.
3 Connecting the power cord
and telephone line
1
Connect the power cord.
Warning
The machine must be fitted with an earthed plug.
2
Connect the telephone line cord. Connect one
end of the telephone line cord to the socket on
the machine marked LINE and the other end to
a modular wall socket.
6
until it clicks, and then
.
for Legal size
Improper Setup
DO NOT connect the USB cable. Connecting
the USB cable is done during the software
installation process.
Warning
Since the machine is grounded through the power
outlet, you can protect yourself from potentially
hazardous electrical conditions on the telephone
network by keeping the power cord connected to
your machine when you connect it to a telephone
line. Similarly, you can protect yourself when you
want to move your machine by disconnecting the
telephone line first and then the power cord.
Note
If you are sharing one telephone line with an
external telephone, connect it as shown below.
1 Extension telephone
2 External telephone
Note
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
Set the receive mode to 'External TAD' if
you have an external answering machine.
For details, see Connecting an external TAD
(telephone answering device) in Chapter 7 of
the User's Guide.
1
2