System Messages - Brady POWERMark User Manual

The text buffer can contain up to 64 type changes made with change markers (such as fonts, type
sizes and underlining). If you exceed this number, the following message displays. You'll need to
delete an existing type change before you can add another one.

System messages

System messages may display in the preview area to give information about something you have
done, ask you to confirm an action (such as deleting a file) or tell you what you've done wrong if
you've made an error. Many of these messages disappear from the screen automatically, although
some ask you to press a key to continue.
Some messages require you to respond to a question, as shown below. If a yes/no response is
required, you can press Enter to accept the displayed response, press the
Yes or No and then press Enter, or type the first letter of the word.
1-20
Too many type changes
Ribbon out. Reload ribbon. Press any
key to continue.
Are you sure?
←
No
→
or key to display
Using the display screen