Printing from a PC
Before printing labels from a PC application, be sure you have installed the print driver.
To create your labels in a Windows application, such as the MARKWARE™ Tape and
Label Software application, choose the Print command as you normally would, and select
your labeling system as the printer.
The printing process works as described in Chapter 4: Printing. The differences are listed
below:
•
When you are printing with multiple colors, you are prompted to insert a new color when
necessary. The message lists all colors remaining to be printed, and you can install any of the
colors in the list.
•
The maximum supported label length is 14 inches (355 mm) when the print job contains
multiple colors; for single color jobs, the maximum length is 109 inches (2768 mm). If your
label is longer than this, the "Page length is too long" message appears.
•
If the PC is unable to establish bidirectional communication with the printer, a message
prompts you to select the ribbon and tape colors that are currently installed. Choose the colors
and click OK.
6-6
Setting up the print driver