Virtual Expression Pedal System; Pedal); Input Level - Boss Audio Systems GT-100 Parameter Manual

Virtual expression pedal system (Internal
Pedal / Wave Pedal)
By assigning a desired parameter to the virtual expression pedal, you can
produce an effect as though you were operating a physical expression
pedal to change the volume or tone quality in real time .
The virtual expression pedal system provides the following two types of
functions, and you can use the SOURCE setting for ASSIGN 1–8 to choose
the desired type .
* If you want to use the internal pedal or wave pedal, set the ASSIGN
parameter SOURCE MODE to "MOMENT . "
Internal pedal
If SOURCE is set to "INT PEDAL, " the virtual expression pedal will begin
operating when started by the specified trigger (INT PDL TRIGGER),
modifying the parameter specified by TARGET .
The value changes in a curve
When the trigger occurs
Wave pedal
If SOURCE is set to "WAVE PEDAL, " the virtual expression pedal will
cyclically modify the parameter specified by TARGET in a fixed wave form .
Always changes in a fixed curve regardless of the actual pedal

Input Level

Input level
The parameter set as the target changes in response to the input level .
MEMO
If you want to adjust the input sensitivity, set the INPUT SENS .
About the Range of a Target's Change
The value of the parameter selected as the target changes within
the range defined by "Min" and "Max, " as set on the GT-100 .
When using an external footswitch, or other controller that acts as
an on/off switch, "Min" is selected with Off (CLOSED), and "Max" is
selected with On (OPEN) .
When using an external expression pedal or other controller that
generates a consecutive change in the value, the value of the
setting changes accordingly, within the range set by the minimum
and maximum values . Also, when the target is of an on/off type,
the median value of the received data is used as the dividing line in
determining whether to switch it on or off .
When using the footswitch:
MAX
MIN
OFF
When using the expression pedal:
MAX
MIN
0
When the pedal is When the pedal is
fully raised fully advanced
When controlling the On/Off target with the expression pedal:
Value
ON
OFF
0
When the pedal is When the pedal
fully raised is advanced
halfway
* The range that can be selected changes according to the target
setting .
* When the "minimum" is set to a higher value than the "maximum, "
the change in the parameter is reversed .
* "The values of settings can change if the target is changed after
the "minimum" and "maximum" settings have been made . If
you've changed the target, be sure to recheck the "minimum" and
"maximum" settings .
CTL/EXP
ON
127
Degree to
Which Expres-
sion Pedal Is
Depressed
127
When the pedal
is fully advanced
35