Ctl/Exp; Accel/Ctl, Exp Sw, Sub Ctl 1, Sub Ctl 2; Exp, Sub Exp - Boss Audio Systems GT-100 Parameter Manual

CTL/EXP

ACCEL/CTL, EXP SW, SUB CTL 1, SUB
CTL 2
Here's how to assign the parameters that will be controlled by the ACCEL/
CTL, EXP SW, SUB CTL 1 and SUB CTL 2 pedals .
Parameter Value
OFF
ACCEL
P .LOOP ON/OFF
P .LOOP REC/PLY
P .LOOP STP/PLY
P .LOOP CLEAR
DIV CH SELECT
OD/DS SOLO
A/B SOLO
A&B SOLO
COMP
OD/DS
PREAMP
EQ
FX1
FX2
DELAY
CHORUS
REVERB
PEDAL FX
SEND/RETURN
AMP CTL
TUNER
FUNC
MANUAL MODE
BPM TAP *1
DELAY TAP *1
MIDI START
MMC PLAY
LEVEL +10 *1
LEVEL +20 *1
LEVEL -10 *1
LEVEL -20 *1
NUMBER INC *1
NUMBER DEC *1
BANK INC *1
BANK DEC *1
LED ON/OFF
*1 The function will activate as soon as you press the pedal, regardless of
whether the SOURCE MODE parameter is MOMENT or TOGGLE .
Explanation
No assignment .
Switches the ACCEL effect on and off .
Switches the PHRASE LOOP on and off .
Records/plays back the phrase .
Stops/plays back the phrase .
Clears the phrase
Switches between Preamp channel A and B .
Switches the OD/DS SOLO on and off .
Switches the Preamp SOLO on and off .
Switches the preamp SOLO, for both
channel A and B, on and off .
If one of the two channels is off, both will be
turned on .
Switches the COMP on and off .
Switches the OD/DS on and off .
Switches the PREAMP/SPEAKER on and off .
Switches the EQ on and off .
Switches the FX1 on and off .
Switches the FX2 on and off .
Switches the DELAY on and off .
Switches the CHORUS on and off .
Switches the REVERB on and off .
Switches the Pedal FX on and off .
Switches the SEND/RETURN on and off .
Switches the Amp Control on and off .
Switches the TUNER/BYPASS on and off .
Switches the MANUAL MODE on and off .
Used for tap input of the MASTER BPM .
Used for tap input of the delay time .
Controls the Start/Stop of external MIDI
devices (such as sequencers) .
Controls the Play/Stop of external MIDI
devices (such as hard disk recorders) .
Increases the patch volume level by 10
units .
Increases the patch volume level by 20
units .
Decreases the patch volume level by 10
units .
Decreases the patch volume level by 20
units .
Switches to the next higher patch number
in the same bank as the currently selected
patch .
Switches to the next lower patch number
in the same bank as the currently selected
patch .
Switches to the next higher bank number .
Switches to the next lower bank number .
Lights/extinguishes the pedal's LED
indicator .
* This is shown only when ACCEL/CTL pedal
is selected .
* This is shown only if PERFORMANCE (p . 28)
is set to PATCH .
Parameter Value
OFF, ON
MIN
(or STOP, START)
OFF, ON
MAX
(or STOP, START)
This sets the behavior of the value each time the switch is
operation .
SOURCE
MOMENT
MODE
TOGGLE

EXP, SUB EXP

Here's how to assign the parameters that will be controlled by the GT-100's
[EXP] pedal, and by an expression pedal (such as the separately available
EV-5) connected to the SUB CTL 1, 2/SUB EXP jack .
Parameter Value Explanation
OFF No assignment .
FOOT VOLUME Foot volume will be assigned .
PEDAL BEND Pedal bend will be assigned .
WAH Wah will be assigned .
FUNC
PB/FV Pedal bend and foot volume will be assigned .
WAH/FV Wah and foot volume will be assigned .
Patch level will be assigned .
PATCH LEVEL
* This is shown only if PERFORMANCE (p . 28) is set
Specifies the minimum value .
PATCH LEVEL
0–200
* This is shown only if FUNC is set to PATCH
MIN
Specifies the maximum value .
PATCH LEVEL
0–200
MAX
* This is shown only if FUNC is set to Patch Level .
* Only FOOT VOLUME can be assigned to SUB EXP (external expression
pedal) . If you want to assign a function other than FOOT VOLUME, use
Assign .
Explanation
This sets the value for times when the
switch is Off .
This sets the value for times when the
switch is On .
The normal state is Off (minimum value),
with the switch On (maximum value) only
while the footswitch is depressed .
The setting is toggled On (maximum value)
or Off (minimum value) with each press of
the footswitch .
to SYSTEM .
LEVEL .
31