Optional-Device Problems - IBM 6643 - NetVista X40 - 128 MB RAM User Manual

Optional-device problems

Symptom
An IBM option that was
just installed does not
work.
An IBM option that
previously worked does
not work now.
68
User Guide
Action
Verify that:
1. The option is designed for your computer.
2. You followed the installation instructions supplied
with the option and in "Chapter 5. Installing options,"
on page 39.
3. All option files (if required) are installed correctly. See
"Chapter 5. Installing options," on page 39 for
information about installing option files.
4. You have not loosened other installed options or
cables.
5. If the option is an adapter, you have provided enough
hardware resources for the adapter to function
correctly. See the documentation supplied with the
adapter (as well as the documentation for any other
installed adapters) to determine the resources
required for each adapter.
6. You updated the configuration information in the
Configuration/Setup Utility program, if necessary,
and have no conflicts. For more information, see
"Chapter 4. Using the Configuration/Setup Utility
program," on page 31.
If the problem persists, run the diagnostic programs. (See
"Running the IBM Enhanced Diagnostics program" on
page 70 for information about diagnostic programs
provided with your computer.)
If you cannot correct the problem, have the computer and
the option serviced.
Verify that all option hardware and cable connections are
secure.
If the option comes with its own test instructions, use those
instructions to test the option.
If you cannot correct the problem, have the computer
serviced.