Preferences - RME Audio Babyface User Manual

21.7 Preferences

The dialog Preferences can be opened via the Options menu or directly via F2.
Level Meters
Full scale samples for OVR. Number
of consecutive samples to trigger an
over detection (1 to 10).
Peak Hold Time. Hold time of the
peak value. Adjustable from 0.1 up to
9.9 s.
RMS +3 dB. Shifts the RMS value by
+3 dB, so that full scale level is
identical for Peak and RMS at 0 dBFS.
Mixer Views
FX Send follows highest Submix.
Locks the FX Send knob to the
channel fader. As TotalMix supports
multiple routings
definition is needed which fader (only
one is visible) is the one that FX Send
will follow. This is always the one with
the highest fader position, means the
highest gain.
Center Balance/Pan when changing
When
Mono/Stereo.
stereo channel into two mono channels
the pan-pots are set fully left and right.
This option will set them to center
instead.
Disable double click fader action.
Prevents unintentional gain settings,
for example when using sensitive
touchpads.
Dynamic Meters
Not valid for the Babyface, as these refer to Compressor and Expander functionality in other
RME devices.
Snapshots
Do not load Main volume/balance. The values stored in the Snapshot are not loaded for
the Main Out, so the current setting is not changed.
Device Handling
Not valid for the Babyface, as it does not contain memory nor can be used stand-alone.
Graphics
Use D2D (Change requires restart). Default on. Can be deactivated to use a compatible
but CPU-taxing graphics mode, in case graphics problems show up.
56
per channel, a
switching a
User's Guide Babyface © RME