Peco Wave Wireless TW205 Operating Manual page 9

BUTTON OPERATION
Fan Button
2
The FAN button is used to control the fan mode. Pressing FAN will show fan mode options.
Press FAN continuously to scroll through the options. The "fl ashing" option is automatically
saved and the thermostat times out. The modes are:
FAN – "FAN" will always be lit in conjunction with "ON" or "AUTO."
ON – Turns on continuous fan, even if no demand exists for heating or cooling.
AUTO – Sets fan cycles with demand for heating and cooling.
*ON Hi – High speed fan is on continuously, even if no demand exists for heating or
cooling.
*ON M – Medium speed fan is on continuously, even if no demand exists for heating or
cooling.
*ON Lo – Low speed fan is on continuously, even if no demand exists for heating or
cooling.
*AUTO Hi – High speed fan cycles with active demand for heating and cooling.
*AUTO M – Medium speed fan cycles with active demand for heating and cooling.
*AUTO Lo – Low speed fan cycles with active demand for heating and cooling.
*NOTE: Options must be selected in the Service Menu in order to appear (see
i
"Advanced Confi guration" in the "Wave Wireless System TW205-TW206 & RW205
Thermostat and Receiver Installation Instructions").
9