Copy Feature - Peco T180 Owner's Manual

preprogrammed ENERGY STAR program.
4. Press ▲or ▼to scroll through the four time periods. To select your preference, press
PROGRAM once.
5. Press ▲or ▼to scroll to the desired starting hour. To select, press PROGRAM
once.
6. Press ▲or ▼to scroll to the desired starting minute. To select, press PROGRAM
once.
7. Press ▲or ▼to scroll to the desired HEAT setpoint temperature. To select, press
PROGRAM once.
8. Press ▲or ▼to scroll to the desired COOL setpoint temperature. To select, press
PROGRAM once.
You're now done with one time period. Your selections have been saved and you have
exited program mode. Repeat steps 1 through 8 for remaining day(s) and time periods.
You may also use the thermostat's "COPY" command to copy all of an individual day's
settings to another day or group of days.

Copy Feature

1. Press PROGRAM once.
2. Press ▲or ▼to scroll until "COPY" is blinking. To select, press PROGRAM once.
3. Press ▲or ▼to scroll to the individual day you want to copy from. "DFLT" (the
default Factory Program) is also a copy option. To select your preference, press
PAGE 19