Cabling Up The Officeconnect Remote; Connecting The Power Adapter - 3Com 3C410012A - OfficeConnect Remote 531 Access Router Getting Started Manual

Getting started guide

Table of Contents

2-10

2: I

HAPTER

Cabling Up the OfficeConnect Remote

CAUTION:

the start of this manual.

Isolate the electrical mains system supply before installation.

Ensure any on/off power switches at the outlet socket are set to their

'OFF' positions.

1 Connect the jack of the power adapter to the power connector on

the rear panel of the OfficeConnect Remote

Figure 2-11 Connecting the Power Adapter

2 Plug the mains plug of the power adapter into a standard mains wall

socket and if necessary switch it on.

The OfficeConnect Remote performs a self test and loads the

software. During the self test and software loading the Alert and

Power LEDs flash.

NSTALLATION

First, read the section;

"Important Safety Information"

(Figure

2-11).

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the 3C410012A - OfficeConnect Remote 531 Access Router and is the answer not in the manual?