Table of Contents
Advertisement
CHAPTER 3 HOW TO LOAD PAPER
1. How to load paper
Paper can be loaded into the two drawers and the multi-bypass.
(1) Precautions for loading paper
After unpacking the paper, fan it several times and then load into the
tray.
(2) Loading paper into the drawer
Up to 250 sheets of standard paper (75 or 80 g/m
specified by our company) or colored paper can be loaded into the
each drawer.
(Inch specifications)
* The each drawer can be set to hold paper of any desired size from
11" x 17" to 5 1/2" x 8 1/2".
(Metric specifications)
* The each drawer can be set to hold paper of any desired size from
A3 to A5R.
IMPORTANT
• Set the type of paper (standard paper, recycled paper, letterheads or
colored paper) to be loaded in the drawer in "5 PAPER TYPE (1ST
to 4TH)" on page 6-14.
1
Pull the drawer out toward you as far as it will go.
* Do not pull more than one drawer out at a time.
3-1
2
/standard paper as
2
Press the drawer bottom plate down and fix it there.
3
Hold the width adjustment lever and move it to align the
width guide with the required paper width.
Paper sizes are marked inside the drawer.
4
Hold both sides of the length adjustment plate and move it to
align with the required paper length.
Advertisement
Table of Contents
