Olivetti d-Copia 20 Operation Manual page 66

5
Close the left cover and multi-bypass.
IMPORTANT
• If the optional duplex unit is installed, be sure to close the multi-
bypass closing the duplex unit.
3 Misfeed in DF <optional> 3 3 3 3
If the message "MISFEED IN FEEDER. REMOVE ORIGINAL(S)."
appears with the misfeed location indicator shown in the illustration, a
misfeed has occurred in the DF. Remove the misfed original using the
procedure given below.
Remove all the originals from the original table.
1
Open the DF original cover.
2
3
Remove the misfed original.
4
Close the DF original cover.
Set the misfed original together with those removed back
onto the original table and resume the copying operation.
CHAPTER 8 WHEN A PROBLEM OCCURS
4 Misfeed in duplex unit <optional> 4 4 4 4
If the message "PAPER MISFEED. OPEN DRAWER OF DUPLEX
UNIT." appears with the misfeed location indicator shown in the
illustration, a misfeed has occurred in the duplex unit. Remove the
misfed paper using the procedure given below.
1
Hold the duplex unit open/close lever 1 and open the
duplex unit.
2
Hold the switchback guide handle 2 and open the
switchback guide, and then remove the misfed paper.
3
Close the switchback guide first and then close the duplex
unit.
5 Misfeed in finisher <option> 5 5 5 5
If the message "REMOVE PAPER. FINISHER" appears with the
misfeed location indicator shown in the illustration, a misfeed has
occurred in the finisher.
8-6