Table of Contents
Advertisement
(3) Machine default settings
The following 15 types of settings can be changed in the machine
default setting mode.
Set them as desired, in order to gain full use of your copier.
Machine default setting
1 STATUS REPORT
Prints contents of machine default settings as a status report.
2 AUTO SHUT-OFF
Turns the auto shut-off function (page 4-7) On or Off. The auto shut-off
function automatically turns off the main switch if copying is not
performed for a certain period of time.
• If auto shut-off interferes with your copying operations, turn this
function off. It is recommended to prolong the time interval that
triggers auto shut-off before actually turning it off.
3 SPECIAL PAPER
In case of selecting the paper size on the message display, displays (
next to the paper size of the drawer if it contains special paper such as
colored paper or recycled paper. Drawer 3 or 4 can be selected only
when the optional drawer has been installed.
• If special paper is loaded in the drawer, select the paper type in
"5 PAPER TYPE (1ST to 4TH)".
4 APS
Selects whether paper in the drawer set in "3 SPECIAL PAPER" is
used or not in the auto paper selection mode or automatic drawer
switching (page 2-4).
5 PAPER TYPE
Selects the type (standard or special) of paper to be loaded in the
(1ST to 4TH)
drawer.
• The settings for Drawers 3 and 4 are not displayed when the copier is
not equipped with the optional drawers for Drawers 3 and 4.
6 PAPER TYPE
Selects the type (standard or special) of paper to be loaded in the
(BYPASS)
multi-bypass.
7 SELECT EJECTOR
Selects whether to eject fax outputs to the copier or either the finisher
OF FAX
or job separator.
• This setting is not displayed when the copier is not equipped with the
optional fax board and finisher or job separator.
8 SELECT EJECTOR
Selects whether to eject copied paper to the copier or either the
OF COPY
finisher or job separator.
• This setting is not displayed when the copier is not equipped with the
optional finisher or job separator.
9 PREHEAT TIME
Selects a certain length of time from when copying ends to when the
energy saver function (page 4-7) is actuated.
Content of machine default setting
CHAPTER 6 COPIER MANAGEMENT
Setting range
———————
ON/OFF
)
SOURCE 1 to
*
SOURCE 4
ON/OFF
PLAIN,
RECYCLED,
LETTERHEAD,
COLOR
PLAIN,
TRANSPARENCY,
LABELS,
RECYCLED,
ROUGH,
LETTERHEAD,
COLOR,
ENVELOPE,
CARDSTOCK
INNER TRAY,
FINISHER,
JOB SEPARATOR
INNER TRAY,
FINISHER,
JOB SEPARATOR
5 to 45 MIN.
(5-minute incre-
ments)
Default setting
Page
—————
6-16
ON
6-16
Not set
6-17
OFF
6-17
PLAIN
6-17
PLAIN
6-17
INNER TRAY
—
INNER TRAY
6-18
15 MIN.
6-18
6-14
Advertisement
Table of Contents
