Table of Contents
Advertisement
When the FDN is turned on in the menu,
you can call only to those specific phone
numbers which have been stored in the
FDN phone book or to those phone num-
bers which start with the same number you
have stored in the FDN phone book (e.g. if
you have stored the prefix 040 in FDN
phone book, you can call to numbers which
start with 040).
However, by storing a switchboard number
with wild characters in the FDN phone
book (e.g. +358 277?00), you can call to its
sub-numbers without separately storing
them in the phone book. The sub-number
allowed is otherwise the same as the num-
ber stored, except for the wild characters,
which can be replaced by any number. The
wild character alias ?-character will be dis-
played when pressing the
times.
The FDN function is very useful in case you
wish to lend your phone to someone.
To change the current FDN setting, press
-
. Select
On
CHANGE
148
MAIN MENU: SECURITY
§
-key four
n
or
Off
with
. Press
-
. Key in the PIN2 code and confirm
OK
the code by pressing
Phone serial number (IMEI)
This menu contains an IMEI (International
Mobile Equipment Identity) code, which is
used to identify your mobile phone.
Your 15-digit IMEI code is also located in
the type label of the phone.
You cannot change the IMEI code.
-
.
OK
Advertisement
Table of Contents
