Table of Contents
Advertisement
tools are also available. For further in-
formation about the T9, please see the
chapter Memo, Messages, Writing mes-
-
sages. Press
NEXT.
Center point coordinates
Now you have two options to choose from:
Enter coordinates
and
Select the desired option with
-
.
- By selecting Enter coordinates you can
either use the previous coordinates if
they exist, or you can key in new co-
ordinates. Press
- By selecting Read current position,
you can set your current position as
your center point coordinates. Press
-
Please note that in order to
OK.
read or set your current position, the
GPS needs to be turned on. For fur-
ther information about the GPS,
please see the chapter Main menu,
GPS.
Read current position
n
and press
-
OK.
SELECTING RADIUS
1.
Select
Radius
CHANGE.
2. Key in the desired radius in 10 meters.
E.g. by entering 20, your actual radius
will be 200 meters. You may also use the
previous setting if there is one.
.
-
3. Press
OK.
SELECTING ALARM MODE
By selecting
Alarm
alert you when crossing the borderline of
an area. The alarm can be set to alert either
when arriving in or departing from the par-
ticular area.
Select the desired option with
-
.
OK
MAIN MENU: TELEMATICS
n
with
and press
, you can set an alarm to
n
and press
-
115
Advertisement
Table of Contents
