Table of Contents
Advertisement
reply to the protocol message will be
sent back to the same number.
- If the setting is Disabled, the sender of
a protocol message can be anyone,
e.g. the message can be sent from the
Internet or the number can be blank.
If the service center number is set, re-
ply is always sent to the service cen-
ter. If the service center number is
not set, reply is sent to the sender of
a protocol message (assuming the
sender´s number is available).
3. To cancel the operation and return to
previous menu level, press
M e s s a g e s t o r a g e
In this menu you can select, whether the
telematics protocol messages are put into
storage, if e.g. there is no service at the mo-
ment. The storage capacity is 100 messages.
After the phone is in service again, these
messages are sent forward.
-
1. Press
CHANGE
storage
menu.
142
MAIN MENU: SETTINGS
.
.
QUIT
to enter the
Message
2. Select the desired option by pressing
-
and
.
OK
3. To cancel the operation and return to
previous menu level, press
M e s s a g e v a l i d i t y
In this menu you can select the length of va-
lidity for telematics protocol messages, i.e.
for how long the SMS messages are stored
in the server of the operator. (The length of
validity for normal SMS messages is select-
ed in the Memo, Messages, Message setup,
Message validity.)
If you have sent an emergency message a
week ago and are no longer in need of help,
this setting is needed to avoid massive help-
ing efforts.
You can choose the message validity from
these: 1 hour, 6 hours, 24 hours, 1 week or
maximum time.
n
.
.
QUIT
Advertisement
Table of Contents
