General Problems Or An Unsatisfactory Wash Result - Miele W 487 WPS Operating Instructions Manual

44
The four feet are not
resting evenly on the
floor.
The spin speed
selected was too low.
These do not indicate a fault. They occur at the beginning
and end of a pumping sequence as a normal part of the
operation.
The machine has switched off the light ring to save energy.
To switch the light ring back on again: press one of the
additional option buttons or turn the programme selector.
The water supply
pressure is too low.
Washing powder used
with water softener
tends to become
sticky.
The siphon is either
incorrectly positioned
or clogged.
§
Too vigorous wash
action.
Not enough detergent
used.
No fabric conditioner
used.
Level the machine. See advice on
installation.
Select a higher spin speed next
time.
– Clean the filter in the water inlet
system.
– It may be useful to press the
Water plus button.
Pour washing powder into the
dispenser before adding any water
softener.
Clean the siphon, see "Cleaning
and care - Cleaning the detergent
drawer".
Programme in gentle action and
more water.
Increase detergent dose to
prevent limescale build up in
laundry.
Use fabric conditioner in last rinse.