Problems With Load Size Indicator/Dispensing Recommendation - Miele W 487 WPS Operating Instructions Manual

The washing machine is
not switched on and / or a
programme has not been
selected.
The amount of laundry in
the drum is less than 25%
of the maximum load for
the programme selected.
When the washing
machine was switched on
there was already laundry
in the drum. This has
decalibrated the sensor
from the zero position.
The load size sensor has
been decalibrated from
the zero position.
The maximum load is 1 kg
for the DELICATES and
Silks programmes and
Silks 2kg for the WOOLLENS
programmes. In some
cases the load size
sensor fails to register
these small quantities.
(The dispensing
recommendation will still
show the minimum value
of 40%).
Switch the washing machine
on. Select a programme and
load the drum.
The display will come on when
25% has been loaded.
Remove the laundry from the
drum and press the button
above the START button until
an audible tone sounds. The
sensor is now recalibrated to
zero.
Rotate the drum once. If the
display does not go out,
recalibrate the sensor to zero
(see above section).
Rotate the drum once.
43