Important Control Panel Features; Programme Selector; Additional Option Buttons; "Spin" Button With Indicator Lights - Miele W 487 WPS Operating Instructions Manual

The programme selector is used to set
the basic wash programme and the
temperature for that programme.
The light ring will go out a few minutes
after the end of the programme to save
energy.
Additional options can be added to the
basic programme.
Pressing the relevant button selects or
de-selects the particular option. The
indicator light will come on to show that
the additional option has been
selected.
If an additional option is chosen, which
is incompatible with the basic
programme, it cannot be selected.
The maximum spin speed which can be
selected depends on the basic
programme chosen.
1800 COTTONS, Drain/spin
1500 Quick wash, Starch
1200 WOOLLENS, Separate rinse
900 MINIMUM IRON, Mixed wash
600 DELICATES
400 Silks
Press the "Spin" button to select a
different spin speed. However, you
cannot select a spin speed higher than
the maximum allowed for the basic
wash programme chosen.
The indicator lights show the speed
selected.
^ Press the "Spin" button to reach:
– Rinse hold
The laundry is not spun and remains
suspended in the final rinse water.
This reduces creasing if the laundry
is not going to be removed from the
drum immediately after the end of
the programme.
To continue the programme select a
spin speed. When the programme is
finished the Anti-crease/Finish light
will come on. Turn the programme
selector to the Finish position and
press the door button to open the
door and remove the laundry.
– Without spin
The laundry is not spun after the final
rinse. After the water has been
drained away the machine goes
straight into the anti-crease stage.
Spinning between the rinses is also
omitted in this setting (rinse and
interim spin).
13