Top-Up Rinse For Cottons - Miele W 487 WPS Operating Instructions Manual

When this is activated, additional wa-
ter flows into the drum at the end of
the main wash to cool the suds down.
Hot suds can damage plastic
drainage pipes.
Top-up rinse takes place when
temperatures of 95°C and 75°C are
selected.
Top-up rinse should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– where the drainage pipes do not
comply with DIN 1986.
The washing machine is delivered with
the Top-up rinse for COTTONS
deactivated.
A
The programmable functions are
activated to call up further features not
shown on the control panel by using the
additional option buttons in
combination with the programme
selector.
Before you begin, first ensure that:
– The washing machine is switched off.
– The drum door is closed.
– The programme selector is at Finish .
G
A Press the additional option buttons
Intensive and Water plus at the same
time, hold pressed in and . .
B . . . switch the machine on with the
I-ON/0-OFF button.
C Let go of all these buttons. P 0
appears in the display.
D Turn the programme selector to
Starch :
E The P will now flash in the display
alternating with the number 10
In addition, one of the following will
appear on the right of the display:
0 = Top-up rinse is deactivated
or
1 = Top-up rinse is activated
F Press the START button to change
from one to the other. The display will
change accordingly from 0 to 1 or
from 1 to 0.
G Switch the washing machine off with
the I-ON/0-OFF button.The setting
you have selected is now stored in
memory and will remain so until you
alter it.
71