Control Panel; Programme Selector; Additional Option Buttons; Additional Options - Miele W 487 WPS Operating Instructions Manual

A
The programmable functions are
activated to call up further features not
shown on the control panel by using the
additional option buttons in
combination with the programme
selector.
Before you begin, first ensure that:
– The washing machine is switched off.
– The drum door is closed.
– The programme selector is at Finish .
A Press the additional option buttons
Intensive and Water plus at the same
time, hold pressed in and . .
B . . . Switch the machine on with the
I-ON/0-OFF button.
C Let go of all these buttons. P 0
appears in the display.
G D Turn the programme selector to
DELICATES 30°C.
E The P will now flash in the display
alternating with the number 2.
In addition, one of the following
numbers will appear on the right of the
display:
1, 2, 3 or 4
F Press the START button to toggle
between the varous settings.
The number on the right of the display
shows which setting is selected.
1 = Setting 1 is selected
(increased water level in the
rinses)
2 = Setting 2 is selected
(increased water level in the main
wash and in the rinses)
3 = Setting 3 is selected
(extra rinse in the COTTONS and
MINIMUM IRON programmes)
4 = Setting 4 is selected
(increase in the water level in the
main wash and rinses and also an
extra rinse in the COTTONS and
MINIMUM IRON programmes).
G Switch the machine off with the
I-ON/0-OFF button.
The Water plus button has now been
allocated the setting you have chosen.
This setting will remain in memory until
another setting is programmed.
69