Table of Contents
Advertisement
Lo Mid – top knob (–12 dB to 12 dB)
Sets the overall gain of the low mid frequency.
Lo Mid – middle knob (160 Hz to 1280 Hz)
Selects the frequency of the low mid.
Lo Mid – bottom knob (.5 to 4.0)
Sets the "Q" or width of the band.
Hi Mid – top knob (–12 dB to 12 dB)
Sets the overall gain of the high mid frequency.
Hi Mid – middle knob (640 Hz to 5120 Hz)
Selects the frequency of the high mid.
Hi Mid – bottom knob (.5 to 4.0)
Sets the "Q" or width of the band.
Hi Shelf – top knob (–12 dB to 12 dB)
Sets the overall gain of the high shelf frequency.
Hi Shelf – bottom knob (2500 Hz to 20 KHz)
Selects the frequency of the high shelf.
On/Off button
Turns the EQ on or off.
File Menu
The File menu lets you save and load snapshots. Snapshots are files (with
the extension .mix) that contain settings for the Dynamics, EQ, Aux buses,
pans, reverb, and levels.
Open Snapshot
Opens a previously saved snapshot.
Save Snapshot
Saves the current settings as a snapshot. If the snapshot already has been
saved and named, this command will overwrite the existing snapshot.
Save Snapshot As
Saves the current settings as a snapshot and prompts you for a file name.
Load Power-On Defaults
Applies the stored power-on defaults (settings) to the IO FW810S unit.
Store Power-On Defaults
Saves the current snapshot settings and applies them to the IO FW810S unit
each time it is turned on. You can use this to make a custom snapshot, save
it as the default, and use the FW810S as a stand-alone digital mixer without
a computer.
Quit
Closes the Mixer.
15
Advertisement
Table of Contents
