Navigating The Menu - Lexicon LFI-10 User Manual

3-8
Using the LFI- 10
Lexicon
Navigating the
Menu
All of the LFI-10 menu choices are accessed from the front-panel MENU
FUNCTIONS section. Use the Scroll knob or the arrowed keys to access the
main menu selections. These selections allow you to view incoming data, alter
outgoing data, or access additional functions. The LFI-10 allows viewing of all
the auxiliary data embedded in a digital audio data stream received on a given
input and will allow editing of the auxiliary data to be transmitted on a digital audio
data stream. For the AES-type data streams this auxiliary data consists of 24
bytes of Channel Status data and 24 bytes of User data. For the SDIF-2 data
stream this auxiliary data consists of Emphasis and Dub Prohibit bits.
A graphic representation of the menu choices is shown on the following
page.
Each main menu category will be detailed further in the following sections.
In general, pressing ENTER with any menu item displayed will access that item's
sUb-menu. In each sub-menu the procedure is the same - scroll to any item,
then press ENTER to view additional submenus. When alphanumeric entry is
reguired, the Scroll knob selects from the available characters, the arrowed keys
move you to another character location. At the deepest menu level, pressing
ENTER will activate your selection. Pressing CANCEL will step you back one
level. Pressing CANCEL repeatedly will return you to the main menu level.