The Io Fw810S Mixer - Overview; Installation - Lexicon I-O|FW810S Owner's Manual

the Io fw810S Mixer - overview

The IO FW810S includes a powerful hardware Mixer with a software con-
trol panel and built-in EQ, dynamics, and monitor reverbs. When open,
the Mixer controls the IO FW810S hardware. The controls are described in
more detail on the following pages, and a step-by-step example project can
be found in the Tutorial at the back of this manual.
To turn a knob in the mixer, click and hold on a knob and move the cursor
up to increase or down to decrease the parameter's value. To move a fader,
click and hold on the fader and move the cursor up or down to move the
fader up or down.
To return a knob to its default position, double click the knob. Ctrl-click to
fine adjust.

Installation

1. Insert the DVD into your DVD-ROM drive.
2. The Installer should start automatically. Follow the on-screen instruc-
tions to install the software you wish to use. The Mixer is included
with the Drivers and Control Software.
Note: You must install the IO FW810S Drivers and Control Software
to use the FW810S.
If the Installer doesn't start automatically, you can start it manually by open-
ing the approprate file on the DVD:
For Mac: Open Me
For Windows: InstallationMenu.exe
7