Io Fw810S Control Panel - Lexicon I-O|FW810S Owner's Manual

IO FW810S Control Panel

If you're using a Mac ® , you can set the Sample Rate (44.1 kHz, 48kHz,
88.2kHz, or 96kHz) and the Sync Source (Internal or SPDIF) using the
Audio MIDI Setup application (located in Applications/Utilities) and your
DAW.
In Windows ® , you can adjust these settings via the Driver Control Panel,
accessed through the Start menu. In addition to the Sample Rate and Sync
Source parameters, the Driver Control Panel in Windows includes a Buffer
Size setting, which controls the size of audio buffers used to stream audio
between the FW810S and your computer. Larger settings give you additional
latency and stability. If you experience pops and clicks in the audio, try
Control Panel - Windows
larger buffer settings.
16