exaMPLe ProJect - recorDInG a GuItar
Welcome to the IO FW810S Tutorial. This tutorial shows you how to set
up the FW810S and Cubase
proceeding steps sequentially for best results. The FW810S works with many
DAW applications, however this tutorial is written for use with Cubase
LE – the recording application which ships with the FW810S. Start with all
cables disconnected. Enjoy.
Make Your Connections
Connect the Guitar
1. Turn the Gain 1 knob all the way down.
Gain 1 Knob
2. Press the Instrument button, located over the Gain 1 knob, to the in
position.
Instrument
Button/LED
3. Connect your guitar to the Mic/Inst 1 input on the front panel.
LE to record a single guitar track. Follow the
®
®
23