Add Monitor Reverb (Optional) - Lexicon I-O|FW810S Owner's Manual

Add Monitor Reverb (Optional)

This will allow you to monitor the signal with reverb applied, but will not
actually record the reverb to the audio track.
1. In the Mixer, in the Input 1 strip, turn up the Send knob to 0.00 dB.
Send
Knob
2. In the Reverb section. click the Power button to turn on the reverb.
3. While playing the guitar, turn up the Main Outs knob until the desired
amount of reverb is reached.
Reverb Power Button
Main Outs
Knob
31