Cd Changer Operation; Operational Readiness Of Cd Changer; Cd Magazine-Load/Unload; Playing Cds - Becker Traffic Pro 4720 Operating Manual

89Ãpuhtr…ƒr…h‡v‚
If a CD changer is connected to the car radio, it is ready for
operation when loaded with a full CD magazine. Close the
sliding tray after loading. Further operation is performed via
the car radio control panel.
To remove the CD magazine, open the sliding cover on the
changer and press the eject button. The magazine is ejected
and can be removed.
When inserting CDs in the magazine, please note imprint on
magazine.
In order to ensure the fastest possible CD change,
the magazine should be fully loaded from com-
partment 1.
Press button. If the unit was last set to CD changer oper-
ation or there is no CD (or navigation CD) in the CD drive,
the CD changer menu is now active.
If CD operation was last selected, use the multifunction but-
ton to switch to CD changer operation.
132
The last CD to be played is played from the position at which
it was left before switching off.
Stored CDs can be selected by turning the right rotary
control .
time. The magazine compartment number or the name of the
CD and the number of the current track on the selected CD are
then displayed.
If no CD is present in the selected magazine compartment
(e.g. compartment 2),
After playing the last track of a CD, the next CD is automati-
cally selected and played.
For further operation, see under CD mode (Page 129):
• "Compact Disc (CD) instructions" on page 129
• "Track skip - forwards / backwards" on page 130
• "Scan search" on page 130
• "Fast forward / rewind" on page 130
• "Random play" on page 130
• "Repeating a track" on page 131
• "Number of tracks and total playing time" on page 131
is displayed during the selection
is displayed briefly.