Becker Traffic Pro 4720 Operating Manual page 13

The last location entered is displayed.
If you want to enter a destination in the displayed location,
you can select or
If your destination lies in another location, select the location
using the right rotary control
Select the letters one after the other by turning the right rotary
control and press to confirm. The enlarged selected letter
appears at the right of the display.
Using the multifunction button
ter is deleted.
The complete entry is deleted if the multifunction button
is pressed for more than 2 seconds.
immediately.
and press to confirm.
the last confirmed let-
Letters which are already entered are displayed inversely. For
the purpose of support, the existing entry is displayed at the
next place-name to be reached. The unit offers only the pos-
sible remaining letters for selection. If no other entries are
available, the unit completes the place-name automatically.
To accept the entry, press and hold the right rotary control
for more than 2 seconds or select the small tick
press the right rotary control
If the complete place-name was previously entered or was au-
tomatically completed, the program switches to either place-
distinguishing list or to road or centre entry.
If no roads and only the centre can be selected in the location
entered, the program switches directly to route menu.
If an incomplete location entry was confirmed, the place se-
lection list is displayed.
and briefly
.
87