Advertisement
Operation:
The most important step in this process is enabling the AUX function from
within the radio menu. Most Becker radios are pre-programmed to recognize a
CD Changer connection and because of that you must perform the following
steps and change the setting to "AUX" otherwise the radio will not recognize the
adapter.
Enabling AUX function
Radios with TP button: (i.e. CDR-220)
1.
Turn radio "ON"
2. Press and hold the "TP" button for about 8 seconds until Becker 1 is
displayed.
3. Turn the Tuning Knob until AUX OFF is displayed.
4. Press either button located directly under the Arrows on the display to
change the present setting from OFF to ON.
Turn radio OFF.
5. Turn Radio back ON, Press "S" (Source) button to enter AUX Mode. This
is the mode to use whenever you want to listen to the device connected
to the adapter.
Radios with ☼ button: (i.e. BE6104)
1.
Turn Radio "ON"
2. Press and hold the ☼ button for about 8 seconds.
3. Select AUX "ON/OFF" option.
4. Press either button located directly under the Arrows on the display to
change the setting to ON.
5. Turn radio OFF.
6. Turn Radio back ON press the "☼" button until "AUX" is displayed.
Other Radios with ☼button (i.e. BE4602)
Turn radio ON.
1.
Press and hold the ☼ button for 8 seconds, until Becker 1 is displayed.
2.
Turn the Tuning Knob until AUX OFF is displayed.
3.
Press either button located directly under the Arrows on the display to
4.
change the present setting from OFF to ON
Turn Radio back "ON" Press "CD" button to enter AUX Mode
5.
Advertisement
