Installation Of The Microphone - Becker Mexico 7948 Installation Manual

Installation of the microphone

The microphone should be placed in the vehicle to allow optimal recognition of the speaker's voice. Possible positions in
the vehicle for the microphone can be seen in the following diagram.
The installation position should be as far away from the loudspeakers, and as near to the speaker, as possible. If prob-
lems occur, different positions should be tested. In order to pick up as little background noise as possible, the micro-
phone has a narrow pick-up angle and must consequently be directed towards the driver.
Affixing the hands-free microphone to a flat and smooth surface can be accomplished with the adhesive strip D
(Clean adhesion surfaces).
A: Optimal installation position
B: Alternative installation position
C: Speaking direction on microphone
Adhesive strip for affixing to smooth surfaces
D:
Screw for fastening the screw-on plate
E:
F: Screw-on plate for affixing to rough or
uneven surfaces.
Installation Guide
9