Becker Mexico CC4325 Operating Manual page 8

Press button and then multifunction button " ". or
are displayed. The loudness can be switched on or off alternately by pres-
sing the multifunction button.
Press and hold button for more than 2 seconds. The tone values for the set
signal source (e.g. radio/FM) are set to an average value .
Press and hold button for more than 4 seconds. All tone values for the
signal sources radio and tape / CD are set to an average value .
Three different reception optimisation settings can be set in order to suppress
reception dependent interference and reflections.
Repeatedly press multifunction button " " in tone menu until the desired
optimisation is set.
Setting for normal operation - i.e., the unit switches from stereo to
mono and back depending upon reception location (provides the optimum set-
ting for almost all reception areas).
Setting for unusal reception situations - i.e. the unit is set perma-
nently to stereo (e.g. for private radio stations in city areas)
Setting for reception conditions in which reflections constantly occur
- i.e., the unit is set constantly to mono.
The setting is effective immediately after pressing the multifunction button
" " and is also retained on switching off.
46