Becker Mexico CC4325 Operating Manual page 27

After requesting the user menu, the following basic settings can be selected
according to your personal preference.
- user memory
- speed-dependent volume control
LHD / RHD setting
- display colour setting (only 4327, 4337)
- telephone characteristics
- aux input setting
- viewing angle setting
- quit user menu
The user menu is requested by pressing the
appears on the display. Further actuation must take place within
four seconds, otherwise the user menu is quit automatically.
In order to quit the user menu, set
menu is quit after 4 seconds.
Request user menu, then set
multifunction buttons " " or " " a choice of three different users is available.
Both tone settings and the last selected station when the unit was switched off,
are stored in each user memory.
Request user menu, then set
multifunction buttons " " or " " enables a choice between red (
yellow ( ) illumination colour. The setting is effective immediately after
actuating the multifunction button.
button for more than 8 seconds.
using the right rotary control. The user
using the right rotary control. Using the
using the right rotary control. Using the
) and
65