Becker Mexico CC4325 Operating Manual page 16

If the selected traffic programme transmitter should interrupt the AM, LW or
tape/CD operation for traffic announcements, the
until the abbreviation
If traffic announcements are not desired, the
the abbreviation appears.
If no traffic programme transmitter is selected, the automatic transmitter search
is activated by pressing the
selected.
During the traffic announcement, the desired increase in volume
can be set via the volume button. An announcement which is
currently being heard can be terminated by pressing the
The unit then switches back immediately to the previously selected
operating mode in the mute condition. However, the next traffic
announcement is switched through again.
After selection of a TP or EON transmitter, the mute function can be activated
by pressing the button briefly. The prompt
only traffic announcements are switched through. The mute function is
cancelled by pressing the
If no TP or EON transmitter is selected,
button. For
54
is displayed.
button must be pressed until
button and a traffic programme transmitter is
button again or by turning the volume control.
is displayed on actuating the
, no traffic announcements are switched through.
button must be pressed
button.
appears. Thereafter,