Setting Time; Saving Position - Becker Indianapolis 7920 Operating Manual

Navigation mode

Setting time

In order to achieve correct navigation on
routes with time-dependent traffic guid-
ance, and to calculate the estimated time
of arrival, it is necessary to set the GMT
time transmitted from satellites to the
current time zone.
X In the System Settings menu, select
TIME and confirm.
X With multifunction button
, the time can be changed from
24- to 12-hour display.
X With the multifunction buttons
or , the time will be changed in
half-hour increments.
148
X By pressing the right rotary control
or multifunction button
time is accepted.
The program returns to the System Set-
tings menu.
or

Saving position

, the set
X Set and confirm SAVE POSITION in
the System Settings menu.
The display will show the co-ordinates
(latitude/ longitude) for the current posi-
tion.
Confirm by pressing the right rotary
X
control .
X Entering a Name for Position.
Press the right rotary control
X
more than 2 seconds to confirm the
name entered.
or
X Highlight the small tick
press the right rotary control
for
and briefly
.