Becker Indianapolis Pro 7950 Operation Manual page 71

Naming a CD
It is possible to assign a name to the CD
currently playing, change a previously
assigned name and delete stored names.
Note:
The entered name is stored in the CD
changer.
Only a limited amount of memory is
available for CD names.
If you replace your CD-changer, the
stored names are lost.
Displaying names:
Requesting CDC settings menu.
!
Press the multifunction button.
!
The assigned name is displayed. If no
name was previously assigned to the
current CD, the space after
blank.
Assigning/changing names:
! Requesting CDC settings menu.
! Press the
Using multifunction buttons
!
and , select the desired position
(inverse editing symbol).
! By turning the right rotary control
select the required letters and press the
right rotary control
This advances it by one character.
A maximum of 8 characters can be en-
is
Name:
tered.
After exiting the CDC settings menu, the
name is saved.
Deleting saved names:
! Requesting CDC settings menu.
Press the
!
Using the right rotary control
!
lect the name to be deleted.
multifunction button.
Now, press the
!
button to delete the name.
,
to confirm.
CD changer mode
multifunction button.
, se-
multifunction
71