General Instructions - Becker Indianapolis Pro 7950 Operation Manual

Notes:
• If you know your way around the
town you are starting out from well
you could insert CD 3 from the begin-
ning and enter the exact destination
address. The system will then show
and a direction arrow until
OFFROAD
you reach a trunk road. In this case,
the direction arrow always indicates
the linear direction to the nearest
trunk road.
• When the different CDs are changed
you will be shown the message
. Confirm this
CHANGE MAP DATA?
message by pressing the right rotary
control . A progress indicator is
displayed while the map data is being
loaded. You can enter the required
destination once the progress indica-
tor has disappeared.

General instructions

• During navigation mode, radio or CD
can still be heard.
The distance to the next announce-
ment and, depending on the setting
made in "Setting the time display" on
page 47, also the estimated time of ar-
rival, the current time or the remaining
travel time are displayed on the right
of the display.
• The unit can be switched to radio
mode when route guidance is in oper-
ation by pressing the
You can switch to CD/MP3 mode by
pressing the button.
The Navigation menu is automatically
displayed when navigation announce-
ments are given.
• When entering the destination, only
those letters, digits and symbols which
are relevant for the destination are dis-
played.
The entries are automatically complet-
ed.
A space (i.e. in Bad Abbach) is en-
tered as an underscore.
Navigation mode
Letter, numbers and symbols can be
selected using the multifunction but-
tons to
characters can be selected by pressing
the relevant multifunction buttons re-
peatedly.
Selection can also be made using the
right rotary control
used in the remainder of this guide.
• exits the current menu and
switches to the previous menu.
• The system recalculates the naviga-
tion if a deviation is made from the
button.
route.
• Briefly press the left rotary control
to hear the current navigation an-
nouncement.
• During a navigation announcement,
the volume can be adjusted using the
left rotary control
pressing
. The individual
, which will be
, and the tone by
(see also page 10).
15