Becker Indianapolis Pro 7950 Operation Manual page 118

Installation Guide
!
Unit rotation corresponds to horizontal rotation. A positive val-
ue means rotation of the front of the unit towards the driver
(LHD).
The unit inclination can now be selected in degrees by turning the right
rotary control and pressing to confirm.
!
Unit inclination corresponds to vertical inclination. A positive
value means upward inclination of the front of the unit.
The number of wheel impulses per wheel revolution (if known) can then
be selected by turning the right rotary control
firm.
!
If the number of wheel impulses per wheel revolution is not
known, UNKNOWN
enter tyre data.
The previously entered data is displayed once more. If the data entered
is correct, press the right rotary control
If correction is necessary, select
control and press to confirm. The values can then be re-entered.
Once the previously entered data has been confirmed, the tyre data can
be entered or self-calibration can be started.
To enter the tyre data, select
right rotary control
118
and pressing to con-
must be selected. It is then not possible to
.
MODIFY by turning the right rotary
INPUT TYRE VALUES
and press to confirm.
by turning the