Becker Indianapolis Pro 7950 Operation Manual page 34

Navigation mode
• DURATION:
Setting as to whether ETA, the current
time or the remaining travel time
should be displayed on the right side
of the display during navigation.
• MOTORWAY:
Stipulation as to whether the route is
calculated with or without motorways.
•
FERRY:
Stipulation as to whether the route is
calculated with or without ferries.
• TOLL:
Stipulation as to whether the route is
calculated with or without toll roads.
•
SPEEDLIMITS:
Setting to stipulate whether speed
limits are to be displayed during navi-
gation.
Scroll through the list of settings by
!
turning the right rotary control
34
! To change a setting select the required
entry and press the right rotary
control .
After 8 seconds without operation, or if
the button is pressed, the system
returns to the route guidance display.
The changes are then active.
Note:
After changing settings (
TORWAY: , FERRY:
route must be recalculated by Indianap-
olis Pro. You may then have to insert
the navigation CD.
.
Changing
! Select
press the right rotary control
! Then turn the right rotary control
select the required route calculation
method.
The setting is accepted by pressing the
!
ROUTE: , MO-
right rotary control
and TOLL: ) the
The list of settings is displayed again.
Note:
Further information on setting options
can be found under "Selecting route set-
tings" on page 24.
ROUTE:
ROUTE: from the settings and
.
.
to